Power; Power Status Light; Wireless Status Light; Reset - Dymo LabelManager® Wireless PnP User Manual

Power

The button turns the label maker power on and off.

Power Status Light

The power LED visually shows the power status of the label maker.
Status Light
Off
Slow Blinking
Fast Blinking
Solid
When the label maker is turned on but not connected to a power source, the
status light remains on but is dimmed.

Wireless Status Light

The wireless LED visually shows the network status of the label maker.
Status Light
Off
Slow Blinking
Fast Blinking
Solid

Reset

The Reset button resets the printer to the factory default settings. Resetting the
printer results in the loss of all current settings, including wireless settings. Press
this button only if you want to erase all current information on the label maker. To
press the Reset button, use a thin object such as the tip of a pen or pencil.
®
6 LabelManager Wireless PnP
User Guide
Power Status
The label maker is off; the battery pack may still be charging
if plugged into a wall outlet
The label maker is on and the battery pack is charging
The label maker is on and there is an error
The label maker is on and the battery pack is not charging
Label Maker Status
The label maker is not connected to a wireless network
The label maker is connecting to a wireless network
The label maker is registering with a wireless network
The label maker is connected to a wireless network