BELT-PACK TRANSMITTER
3
2
1
1. ON/OFF BUTTON
2. LCD DISPLAY: Information
screen appears when the power is
switched on.
3. RED LED: Lights up briefly when
power is switched ON, flashes
continuously when audio signal is
muted.
4. MUTE SWITCH: Turns the audio
signal ON and OFF. The RED LED
will flash when MUTE is engaged.
If muted for 30 minutes, the unit
will power down.
5. MICROPHONE JACK: Microphone
connects to transmitter here.
6. BELT CLIP
7. BATTERY CHARGER JACK:
Optional battery charger plugs in
here (for NiMH batteries only.)
8. DOOR LATCHES: Press both
latches to open the battery
4
5
6
7
8
9
10
12 11
14
compartment door.
9. GT (TRANSMITTER GAIN):
Provides adjustment for differing
voice levels and microphone
sensitivities.
10. MT (MICROPHONE GAIN):
Provides adjustment for differing
voice levels and microphone
sensitivities.
11. SET BUTTON: This button is
used to enter and save changes in
each setup screen.
12. UP BUTTON: Scrolls UP between
setup screens on the LCD display.
It is also used to enter changes in
each setup screen.
13. DOWN BUTTON: Scrolls DOWN
between setup screens on the
LCD display. It is also used to enter
changes in each setup screen.
14. BATTERY COMPARTMENT
13
31