Table of Contents
Advertisement
QUICK START GUIDE
2. Handheld Transmitter Setup
• Press and hold POWER to turn on.
• To set channel, press and hold SET
until cursor blinks on LCD display
(approximately 3 seconds).
• Use UP and DOWN to change
channel number.
• Press and hold SET to save
selected channel.
3. Belt-pack Transmitter Setup
• Press and hold ON for power.
• Open the plastic door by
depressing latches on each side.
• To set channel, press and hold SET
until cursor blinks on LCD display
(approximately 3 seconds).
On/Off
Button
LCD
Display
CONT'D
Red LED
Mute Switch
Mic Jack
Belt Clip
POWER
PWR
PWR
DN
DN
DOWN
LCD Display
• Use UP and DOWN to change
channel number.
• Press and hold SET to save
selected channel.
• Attach microphone into Mic Jack.
CH: 002
CH: 002
CH: 002
CH: 002
694.500M
694.500M
NiMH
NiMH
AKLN
AKLN
Toggle
Gain
UP
Adjust
SENS SET
SENS SET
LEVEL [2]
LEVEL [2]
Door
Latch
LS
LS
HM-900
HM-900
SET
UP
UP
UP
CH: 002
CH: 002
CH: 002
694.500M
CH: 002
NiMH
694.500M
AKLN
NiMH
SENS SET
AKLN
LEVEL [2]
SENS SET
LS
LEVEL [2]
HM-900
LS
HM-900
Set
Toggle
DOWN
7
Advertisement
Table of Contents
