Table of Contents
Advertisement
10. MUTE AND GAIN ADJUST ON BELT-PACK
TRANSMITTER
Transmitter Mute:
The MUTE switch turns the
transmitter's audio signal on or off.
The audio is OFF when the RED LED
is flashing.
Gain Adjust:
When changing microphones or
users, it may be necessary to adjust
the transmitter gain based on
differing microphones sensitivities
and voice levels.
To adjust the gain:
1. Open the battery compartment
door by depressing the latches on
each side of the transmitter.
2. Turn the MT dial clockwise
to increase the gain and
counterclockwise to decrease the
gain.
24
NOTE: If you are using a high
impedance source, such as a guitar,
it will be necessary to adjust the GT
dial. Using a high impedance source
requires a special cable. Contact
Lightspeed Customer Service at 800-
732-8999 for more information.
Advertisement
Table of Contents
