Lightspeed Delta X6 User Manual page 15

2A. SETTING UP ONE DELTA X6 RECEIVER
1. Turn the Delta X6 ON by rotating
the WM1 knob clockwise. The
GREEN LED will light.
Channel Selection: Receiver
Each Receiver has 100 user-selectable
channels to choose from. You can
either select a channel manually or by
pressing the SCAN button, which will
automatically select a clear channel.
2. When the system is switched on,
the receiver will have two letters
flashing on the screen to indicate
the corresponding frequency
group.
3. Clear Channel SCAN (recomm-
ended):
A) Make sure the transmitter(s) is
OFF before pressing this button.
When this button is pressed, the
receiver will cycle through all
100 channels and select a clear
frequency. (This process takes
about 20 seconds.)
B) Once the receiver selects the
clear channel, you will need to
select the same channel on the
corresponding transmitter
(handheld or belt-pack). See pages
11 and 16 for instructions.
NOTE There are 3 different groupings
of 100 channels available. When
the system is powered ON, the
two letters that initially blink in the
channel window on the receiver
indicate the frequency group (see
chart on page 25 for further details).
7100R
UHF TRUE
DIVERSITY
LightSPEED RECEIVER
A B
CHANNEL
LOW
RF SCAN SQ
BAT
7100R
UHF TRUE
DIVERSITY
RECEIVER
LightSPEED
A B
CHANNEL
LOW
RF
SCAN SQ
BAT
7100R
UHF TRUE
DIVERSITY
LightSPEED RECEIVER
A B
CHANNEL
LOW
RF SCAN SQ
BAT
15