Table of Contents
Advertisement
5. BATTERY LIFE INDICATOR AND BATTERY-
TYPE ON HANDHELD MICROPHONE
Battery Life Indicator
The battery life is shown on the
primary screen of the LCD. The 7-step
fuel gauge acts as a detailed guide to
show the actual life of the battery.
Battery Type
The transmitter will operate with
either standard AA alkaline batteries
or nickel metal hydride (NiMH)
rechargeable batteries. Since these
types of batteries have different
characteristics, it is important to set
the transmitter to the appropriate
type of battery being used so that
the Battery Life Indicator will operate
properly.
To change the Battery Type setting:
1. Press the UP button 2 times to get
to the Battery Type screen.
2. Press and hold the SET button until
a blinking cursor appears.
3. Use the UP and DN buttons to
make a selection.
4. Press and hold SET until the
blinking cursor disappears.
NOTE: Do not mix battery types.
WARNING: Do not use NiCad
batteries! They will not charge
properly and may cause damage to
the transmitter.
Lightspeed recommends Panasonic
or Energizer batteries. Duracell may
not work.
CH: 002
CH: 002
694.500M
CH: 002
NiMH
AKLN
CH: 002
694.500M
SENS SET
LEVEL [2]
NiMH
CH: 002
AKLN
LS
HM-900
SENS SET
CH: 002
LEVEL [2]
694.500M
CH: 002
CH: 002
LS
NiMH
HM-900
AKLN
CH: 002
694.500M
CH: 002
694.500M
SENS SET
LEVEL [2]
NiMH
NiMH
AKLN
AKLN
LS
HM-900
SENS SET
SENS SET
LEVEL [2]
LEVEL [2]
LS
HM-900
LS
HM-900
PWR
PWR
DN
DN
UP
UP
PWR
PWR
DN
DN
UP
UP
PWR
PWR
DN
DN
UP
UP
PWR
PWR
DN
DN
UP
UP
19
Advertisement
Table of Contents
