Individual Lower Oven Test - Viking DSOE305T Service Manual

Diagnostics
Service Diagnostics and Testing
4. Individual upper oven tests (DDOE305T – cont.)
Individual oven tests (DSOE305T – cont.)
Step To test:
17 Press SET
18 Press SET
19 Press SET
To exit this test, select the "ENTER", "CLEAR", or "DOWN ARROW" pad.
5. Individual lower oven tests (DSOE305T)
This test allows the individual to scroll to a specific component and then select it for testing. To enter this
test, enter diagnostic mode (see accessing the diagnostic section, page 18). With the unit in diagnostic
mode, press the "DOWN ARROW" pad to scroll to the Individual lower oven test and press the "ENTER"
Pad. When you have selected this test, the first screen you will see will be the one shown below.
The following is a table consisting of all the individual components that can be tested in this program.
To scroll through each test, use the "UP ARROW" or "DOWN ARROW" pad, and then press "SET" or
"ENTER" to run the selected component test.
Step To test:
1 Press SET
2 Press SET
3 Press SET
4 Press SET
***If no amperage is read, check STEP 1 (Inner Bake Element). If amperage is read, the plug on the relay
© 2010 Viking Preferred Service
Test
Door Lock State
Door Unlock
Door Lock State
Test
Inner Bake Element
Outer Bake Element
Inner Broil Element
Outer Broil Element
Result
Position of door lock switch
Engage door lock to unlock door
Position of door lock
switch
Result
SKIP THIS TEST
(No amperage should be read on
Step 1. Not used on DSOE and
DDOE models )
Run bake element***
Position of door lock switch
Run inner broil element
To exit:
Enter, Clear, or
Down arrow
Enter, Clear, or
Down arrow
Enter, Clear, or
Down arrow
To exit:
Enter, Clear, or
Down arrow
Enter, Clear, or
Down arrow
Enter, Clear, or
Down arrow
Enter, Clear, or
Down arrow
board is reversed.
26