Smoke Eliminator; Rack Support - Viking DSOE305T Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.

Smoke Eliminator

To access smoke eliminator:
1. Open oven door.
2. Remove broil element (see Broil Element
Disassembly, page 57).
3. Remove screws securing broil baffle and
remove baffle.
Smoke Eliminator
Broil Baffle
Screw
4. Remove screws securing smoke eliminator to
oven cavity.
Screw
5. Repair or replace smoke eliminator.
6. Reverse procedure to reinstall.
© 2010 Viking Preferred Service
WARNING
Screw
Screw

Rack Support

To access rack support:
1. Remove oven door (see Door Removal,
page 54).
2. Remove screws and rack supports from each
side of oven cavity.
Screw
Rack Support
Screw
3. Reverse procedure to reinstall.
60