Table of Contents
Advertisement
Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.
Oven Light
CAUTION
DO NOT touch bulb with bare hands. Clean off
any signs of oil from the bulb and handle with
a soft cloth.
To access oven light:
1.
Unsnap oven light cover.
2.
Firmly grasp light bulb an pull out of socket.
3.
Replace with new halogen bulb following
wattage and voltage rating on old halogen
bulb.
4.
Reinstall light cover.
1
3
© 2010 Viking Preferred Service
WARNING
2
4
Bake Element
To access bake element:
1.
Slide unit out of installation (in order to
replace the bake element, the oven has to be
completely removed from the cabinet).
2.
Remove rear cover (see Upper Rear/Rear
Cover Disassembly, page 55).
3.
Remove oven cooling fan (see Oven Cooling
Fan, page 62).
4.
Disconnect wiring, remove screws securing
rear trim pieces and remove trim.
Screw
Screw
5.
Carefully remove insulation covering bake
element.
Insulation
Screw
Screw
Screw
61
Hide quick links:
Advertisement
Table of Contents
