Menu Examples; Sleep - pro bel V6402 HD User Manual

V6402, V6404, V6406, V6408
and V6418 HD converters
3.1.4

Menu Examples

This section has examples of how to manoeuvre through the menu system. The first one starts with the
unit in its 'sleep' mode where the display is blank, and then proceeds to set the reference source to the
processing input (Vid I/P).
Action
Select
Select
Select
▼
▼
Select
▲
Now we shall select how the unit behaves when the input fails. The following steps should be taken from
the current position (Select+Hold means that you should press and hold the select button for about half a
second):
Action
Select+Hold
▼
▼
Select
▲+ Hold
▼
3.1.5

Sleep

If the front panel is not used for a certain amount of time then the display will automatically go into a sleep
mode when it will be blank. Pressing any of the buttons will cause it to 'wake up' back into the top level.
The time delay before the unit slips into sleep mode can be set up using the ENG'ING : Sleep menu.
The brightness of the display can also be adjusted using the ENG'ING : LEDLevel menu.
HU-V6402&4&6&8&18
Display Comments
V6404SV Top Level
VIDEO The Main Menu we want
Source The first Sub Menu in the list
A/R
Ref Src The Sub Menu we want
Auto The default setting
Vid I/P Set it as we want it
Display Comments
Ref Src UP to the Sub Menu level
Anc Data
VFL Mode The Sub Menu we want
Black The default setting
1 sec Unit automatically counts up till it comes
to...
Freeze or do you want it to go 'Black' after 14 sec?
14 sec Set it as we want it
27