Menu Control - pro bel V6402 HD User Manual

3.1.3

Menu Control

▲ ▼
The Select, and
five levels and the Select button is used to go up and down the structure. The
to move between selections or to adjust a parameter depending on which sort of menu is displayed. The
five levels are as follows:
Sleep
Top Level
Main Menu
Sub Menu
Parameter
To move down a level just press the Select button briefly; then press either the Select button again to go
down another level or the
To move up a level press and hold the Select button for about half a second which will move up one level.
If you continue to hold the Select button then it will move up a level every half a second until it reaches
the Sleep level (one above the Top Level).
A complete list of all the menus is given in Section 5.
26
buttons are used to manoeuvre around the menu system. The menu structure has
Display is blank (except for Banner warnings).
As above, e.g. V6402FD
The Main menu items, such as VIDEO, STATUS, ENG'ING etc. These
items are all in Upper Case.
Menu items under each main heading, such as Source or A/R under the
VIDEO main menu. These items are all in Sentence Case (generally
lower case but with upper case first letters).
The lowest level under the Sub Menu, and used to actually adjust a
parameter. The display will depend on the actual parameter and may be
a value such as +0.00dB for a gain or ON or OFF for a switch variable.
There is usually a title to describe the variable and a small icon in the left
hand character position, but 8 characters cannot provide for a detailed
description.
▲ ▼
and buttons to move around the options within a level.
V6402, V6404, V6406,V6408
and V6418 HD converters
▲ ▼
and buttons are used
Issue 6