Table of Contents
Advertisement
ChannelView Channel Listings
ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
About ChannelView
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed
for analog channels. See
Channel Scan," page 12
ChannelView allows you to set up three banks of custom
channels for convenient access. You can save groups of
channels by content (e.g., news, sports, children's program-
ming) or by TV user.
Note: You must first set the TV Clock
receive ChannelView listings.
ChannelView, "All" tab. Programs are listed on the right.
Using ChannelView Listings
Task
Display/hide ChannelView
listings (ANT input only).
Move through channels
one by one.
Move through channels
quickly.
Jump to listings for a spe-
cific channel.
Tune to a highlighted
channel.
Update program informa-
tion for a highlighted digital
channel.
Display program descrip-
tions, if available. The
description will appear at
the bottom of the screen.
Display more program
description for the current
channel (if available).
Downloaded From TV-Manual.com Manuals
"Memorizing Channels with
if needed.
(page
54) to
Action
Press GUIDE.
Press
or
.
Press CH.
Enter the channel number.
Press CANCEL to add a
dash; press twice to clear
the channel number.
Press ENTER.
Press the INFO key (the
screen may briefly go
blank).
1.
Press
to move into
the program area.
2.
Press
to move
between programs.
Press INFO.
3. TV Features
ChannelView Custom Channel Banks
Select a channel bank to customize.
1.
Press
GUIDE to display ChannelView.
2.
Press
MENU to move the highlight to the bank
header.
3.
Press
to select Bank 1, 2, or 3.
4.
With the bank name highlighted, press
enter setup mode where you can select channels to
include in the bank.
5.
Press
EXIT when finished with setup.
Task
Move between banks
Move into the channel list Press
Add or delete a channel
from the bank
Remove all channels
from the selected bank
Enter or exit setup mode
Using Custom Channel Banks
•
While watching TV, press
to channels stored in the current bank.
•
To
change to a different channel bank:
1.
Press
GUIDE.
2.
Press
MENU.
3.
Press
.
4.
Press
EXIT.
•
To allow tuning to any channel in memory, select
the All bank.
For assistance call 1(800) 332-2119
29
ENTER to
Action
Press
.
.
•
Highlight the channel
and press ENTER. A
check indicates the
channel has been
added.
ENTER again to
•
Press
clear the check and
remove the channel.
Press CANCEL.
Press MENU.
CH. The TV will tune only
Advertisement
Table of Contents
Troubleshooting
