5
62
NetCommand IR Control
About NetCommand IR Control
•
NetCommand IR home-theater control is avail-
able on 838 series TVs.
•
IR emitter cables are available for purchase
from Mitsubishi. Visit www.mitsuparts.com or call
800-553-7278 and request one of the following:
-
242D483020
299P254020
-
•
NetCommand setup is optional.
•
You can perform NetCommand setup for a device
any time after the TV has detected the device.
•
NetCommand operates by sending remote control
signals from the TV to your other devices via the
Downloaded From TV-Manual.com Manuals
For assistance call 1(800) 332-2119
(two-ended cable)
(four-ended cable).
IR (infrared) emitters, telling the devices to play,
record, change inputs, adjust volume, change chan-
nels, or perform other functions. All this is accom-
plished with the TV's remote control left in TV mode.
•
You may wish to use NetCommand IR control to
supplement control of CEC-enabled devices.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
NetCommand can control your devices.