Channelview Channel Listings - Mitsubishi Electric Unisen 154 Series Owner's Manual

30
3. TV Features

ChannelView Channel Listings

ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
About ChannelView
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed
for analog channels.
ChannelView allows you to set up three banks of custom
channels for convenient access. You can save groups of
channels by content (e.g., news, sports, children's program-
ming) or by TV user.
Note: You must first set the TV Clock (page 52) to
receive ChannelView listings.
ChannelView, "All" tab. Programs are listed on the right.
Using ChannelView Listings
Task
Display/hide
ChannelView listings
(ANT input only).
Move through channels
one by one.
Move through channels
quickly.
Jump to listings for a
specific channel.
Tune to a highlighted
channel.
Update program infor-
mation for a highlighted
digital channel.
Display program descrip-
tions, if available. The
description will appear at
the bottom of the screen.
Display more program
description for the current
channel (if available).
Downloaded From TV-Manual.com Manuals
For assistance call 1(800) 332-2119
Action
Press GUIDE.
Press or .
Press CH.
Enter the channel number.
Press CANCEL to add a dash;
press twice to clear the
channel number.
Press ENTER.
Press the INFO key (the
screen may briefly go
blank).
1. Press to move into
the program area.
2. Press to move
between programs.
Press INFO.
Get other manuals https://www.bkmanuals.com
ChannelView Custom Channel Banks
Select a channel bank to customize.
1.
GUIDE to display ChannelView.
Press
2.
MENU to move the highlight to the bank
Press
header.
3.
Press to select Bank 1, 2, or 3.
4.
With the bank name highlighted, press
enter setup mode where you can select channels to
include in the bank.
5.
EXIT when finished with setup.
Press
Task
Move between banks
Move into the channel list Press
Add or delete a channel
from the bank
Remove all channels
from the selected bank
Enter or exit setup mode
Using Custom Channel Banks
• While watching TV, press
to channels stored in the current bank.
• To change to a different channel bank:
1. GUIDE.
Press
2. Press MENU.
3.
Press .
4. Press EXIT.
• To allow tuning to any channel in memory, select
the All bank.
ENTER to
Action
Press .
.
• Highlight the channel
and press ENTER. A
check indicates the
channel has been
added.
ENTER again to
• Press
clear the check and
remove the channel.
Press CANCEL.
Press MENU.
CH. The TV will tune only