Mitsubishi Electric 738 Series Owner's Manual page 27

Supplemental Audio Connections, continued
Using the TV Speakers as a Center
Channel
If using an external surround sound system, you can
make the TV's speakers provide center channel sound.
Your A/V receiver must have a center channel pre out
that can supply an amplified center-channel signal to
the TV.
1.
Connect your A/V receiver's HDMI output and
center channel pre out to the TV as shown.
HDMI
2
1
A/V receiver
with HDMI
output
Surround sound
source device
2.
Turn on the A/V receiver's center channel pre out if
needed. See the A/V receiver's instruction manual.
3.
Press the VOL key to adjust TV volume to about level
30.
Downloaded From TV-Manual.com Manuals
SUB
CENTER CENTER WOOFER
INPUT INPUT
OUTPUT
ANT
DIGITAL
AUDIO/SURROUND DVI/PC AUDIO
AUDIO
R OUTPUT L
R INPUT L
OUTPUT
IR-NetCommand
Output/EXTERNAL
CONTROLLER INPUT
Y/ VIDEO Pb Pr
3D
GLASSES
LAN
EMITTER
3
CENTER
INPUT
Y/ VIDEO Pb Pr
R AUDIO L (480i / 480p / 720p / 1080i)
RCA/RCA
HDMI cable
audio cable
CENTER
CHANNEL
PRE OUT
HDMI OUT
2. TV Connections
4.
Enable the TV's center channel mode:
a. Go to Sound > Global and set Center Channel
to On.
b. Press the AUDIO key and press
the TV Speakers option. Press
Center.
5.
To balance volume:
a. Power on the A/V receiver and TV.
b. Compare the volume of the TV's center channel
with the rest of the sound system. If the TV
volume needs adjustment,
i. Turn on the TV speakers. Press AUDIO and
to display the TV Speakers option.
press
to select On.
Press
ii. Adjust TV volume using the VOL key.
iii. Return the TV to center channel mode.
Press AUDIO and press
TV Speakers option. Press
Center.
iv. Compare the sound volume. Repeat this
adjustment if needed.
For assistance call 1(800) 332-2119
27
to display
to select
to display the
to select