Inputs
Inputs
Name
INPUT and HDMI jacks:
Cable box, Cam(corder), CD,
DVD (DVD, DVD2, Blu-ray), DVR,
Game (Game, PS, Xbox, Wii),
Media Box, PC, Satellite, AVR
On/Off (ANT, Bluetooth only)
INPUT jacks only:
CD/Audio, MP3 Player, VCR
HDMI jacks only:
PC, AVR, Delete
General Notes for the Inputs > Name Menu
When you change an input name and then exit the
Name menu:
•
The name is changed
•
The icon in the
•
Audio and video settings are changed to the
defaults for the new device type.
838 Series:
•
All previous NetCommand IR "learn-
ing" for the input is erased.
Notes for HDMI devices
•
Disconnecting an HDMI device:
nect an HDMI device, the icon remains in the Input
Selection menu until you remove it. Select Delete in
the Inputs > Name menu to remove an unwanted icon
for an HDMI input.
Inputs
Learn
Inputs
AVR
HDMI
Inputs
Control
Downloaded From TV-Manual.com Manuals
•
Lets you assign or
tion menu. Highlight an input and press ENTER multiple times to cycle
through the name choices.
•
Lets you turn the
in the Input Selection menu; highlight the input and press ENTER to switch
between On and Off. A paired device is cleared from memory when the
Bluetooth icon is turned off.
•
Lets you delete unused HDMI inputs from the
•
A CEC-enabled tuner can be named either
•
A CEC-enabled DVD player can be named
Input Selection menu is changed
When you discon-
838 Series. Sets up or changes NetCommand IR control of the current device.
See
"About NetCommand IR Control," page
838 Series. Sets up or changes NetCommand IR control of an A/V receiver.
See
"NetCommand IR Control of an A/V Receiver" on page
Select On or Off to enable or disable the TV's control of a CEC-enabled
On, Off
device. See
of this feature.
change names of inputs appearing in the Input Selec-
Ant and Bluetooth inputs On/Off to display or hide them
New Device Found screen does not display
•
If the
as expected when you connect an HDMI device,
see
"Reactivating Auto Input Sensing for an HDMI
Input," page
•
HDMI Control and CEC-Enabled Devices:
Appendix
page
83.
•
In case of CEC conflicts:
these ways:
-
Turn off the TV's HDMI Control signals to the
device (Inputs > HDMI Control menu).
-
Turn off each device's internal CEC capability.
See
Appendix C
turn on/off a specific device's response to CEC
signals, see the device owner's manual.
62.
Appendix
C, "HDMI Control of CEC Devices" on
For assistance call 1(800) 332-2119
4. TV Menus
Input Selection menu.
Cable Box or Satellite.
DVD, DVD2, or Blu-ray.
13.
C, "HDMI Control of CEC Devices" on
Turn off CEC signals in
for the TV's HDMI Control or, to
68.
page 83
57
See
for use