Channelview Channel Listings; Redirecting Audio Output; Controlling A/V Receiver Volume - Mitsubishi Electric Unisen LT-52151 Owner's Manual

26
3. Using TV Features

ChannelView Channel Listings

ChannelView. Programs for the tuned channel are
listed on right side of screen.
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program informa-
tion for digital channels as sent by broadcasters or your
local cable service provider (information may be incom-
plete). No program information is displayed for analog
channels.
Note: You must set the TV Clock (page 47) to receive
ChannelView listings for the current channel.
Using ChannelView
Feature
Receive updates for a
digital channel.
Display/hide ChannelView
listings from the ANT
input.
Scan channels one by one. Hold or .
Scan channels quickly.
Jump to listings for a spe-
cific channel.
See more of the program
description for the current
channel (if available).
Tune to the highlighted
channel.
Instructions
1. Press to
highlight a channel
number.
2. INFO key
Press the
(the screen may
briefly go blank).
GUIDE
Hold PAGE UP/PAGE DN
1. Enter the channel
number.
2. ENTER.
Press
INFO
ENTER

Redirecting Audio Output

Selecting an Audio Output Device
1.
Press MORE and then 9 (AUDIO).
2.
Press to show the Speakers option. The Speak-
ers option will display only if there is a recognized
audio device on an audio or HDMI output.
3.
to select either AV Receiver, Head-
Press
phones, or TV.
Adjusting an External Subwoofer
1.
Play sample video or music containing low-fre-
quency bass sound.
2.
Press MORE and then 9 (AUDIO). Use to
display the Subwoofer option.
3.
With Subwoofer set to On, press ENTER to display a
slider for volume.
4.
Press to adjust the subwoofer volume level.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol's MORE > 9 (AUDIO )key or the Adjust > Audio >
Speakers menu.

Controlling A/V Receiver Volume

With a Standard TV Setup
Recommended Method:
•
remote control for your A/V receiver and enable the
Audio Lock feature. See page 69.
• Program the TV's remote control for your A/V
receiver and set the TV remote control's mode to
AUDIO. Return the control mode to TV to control the
TV.
• Use the remote control that came with the A/V
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV's remote control may control some functions of
the A/V receiver. See Appendix B, "HDMI Control of
CEC Devices," page 75.
With NetCommand IR Control
153 and 249 Series. Set up NetCommand control of
the A/V receiver's volume functions in the Inputs > AVR
menu. The TV's remote will then control A/V receiver
volume. See page 62.
Program the TV's