Auto-Stop Buttonhole (Applicable To Model 6125Qc Only) - ELNA 6125QC Service Manual

Auto-Stop Buttonhole (applicable to Model 6125QC only)

The machine will stop automatically when buttonhole is completed. If the machine stops too early or too late,
correct it as follows:
Adjustment procedure:
1. Remove the face cover (See page 4.).
2. Loosen the setscrew (A).
3. If the machine stops too early: Move the adjusting plate in the direction of (B).
4. If the machine stops too late or does not stop: Move the adjusting plate in the direction of (C).
5. Tighten the adjusting screw (A).
6. Attach the face cover.
Adjusting plate
Setcrew (A)
Mechanical Adjustment
Machine sews a few
stitches at low
speed then stops
automatically.
(C)
(B)
X
26
Machine stops too
early.