5. Device control
30
5. Device control
1 Open Device c c ontrol window:
Instrument
-> Device c c ontrol
The Device control window is divided up into three
registers:
· Instruments/Probe i i nformation
· Measurement p p rograms
· Configuration
2 Open register required:
5.1 Instruments /
Probe information
Important information about the instrument system
connected is shown.
5.2 Measurement programs
5.2.1 Set up the measurement
program
A measurement program can be set up and
connected to the instrument.
Select site:
on site name.
If a site is not available, the program sets up a new
site.
Starting criteria
Select starting criterion:
· PC s s tart ( ( manually)
Measurement program starts once
is activated.
· Start k k eypad i i n i i nstrument
Measurement program is started once the
button on the measuring instrument is
activated.
.
on register.
.