Table of Contents
Advertisement
10
AP6562E Access Point
A torque wrench or ratchet with a 10mm adapter, or an adjustable wrench, can be used to assemble the mounting
brackets. A finished assembly of the mounting bracket kit is shown below. Assembly during deployment may
differ to achieve the required angle and rotation.
2.3.2 Extension Arm Kit
When mounting an AP6562E on poles more than 3 inches in diameter, use the extension arm kit (KT-150173-01) to
provide a minimum standoff distance of twelve inches to avoid interference with the antennas. The extension arm
kit is only required for AP6562E external antenna models.
Advertisement
Table of Contents
