Table of Contents
Advertisement
[Countermeasures against heat]
[Important]
The equipment is subject to temperature increase caused by internal power consumption as its overall size is notably small.
Place the equipment on the
Consider to use a cooling system such as separately sold heat sink (HS500) or air-cooled fan, if the increase of temperature is a
concern. Also, avoid using the plural equipments placing in mutual proximity.
[Fixing screw for the camera]
[Important]
Beware of a screw length when fixing the camera to a mounting bracket or a metal plate
at user's site. The screw length should not exceed the value designated in the
"External dimensions" on the last page of this document.
.If it exceeds the value, there is a possibility that the contents of the camera are broken.
10.
Specifications
[Specifications]
Imaging device
Number of effective pixels
Read out scanning
Standard sensitivity
Minimum illuminance
S/N
Video output signal
Monitor output
External Sync input
Electronic shutter
Asynchronous shutter
Scan mode
Lens mount
Optical filter
External control
Special functions
Power supply
Operation ambient temperature 0° C to 40° C (Shall be free from dew condensation an d frost.)
Storage temperature range
Anti-shock
Anti-vibration
External dimension
Weight
(Note) Note that the specifications are subject to change for improvement without notice.
high thermal conductive
mount to fix it.
Progressive scanning, interline transfer CCD
1/1, 8 inch size
Unit cell size: 4.4µm(H) × 4.4µm(V) square grid pattern
1628 (H)×1236(V)
Horizontal scanning frequency:
Vertical scanning frequency:
Pixel clock frequency:
800Lx F11 *
(* Digital output with exposure time of 1/30 seconds and 512/1024 gray scale)
8 Lx (F1.4)
Approx. 42dB
Progressive scanning: 20 frames / sec
Digital 10 or 8 or 12 bit
10 bit / 8 bit / 12 bit switchable
1920(H)×1080(V) 60Hz (Reduced Blanking)
Display area 1600 (H)×1080 (V)
None
1/16000 sec. ~ 1/ 20 sec. (no shutter) ~ 10 sec.
Preset shutter / pulse width control
(With /Without H-reset selectable for each)
Normal scan (all pixels)
C mount (flange back fixed)
IR cut filter
Serial interface via Camera Link
Function of superimposing setting information over image screen
Function of monitoring internal temperature of camera
DC12V±10%, 400mA
-30° C to 60° C (Shall be f ree from dew condensation and frost.)
70G
7G
36(W) × 31(H) × 70.5(L) mm (excluding tripod attachment)
Approx. 120g
f
=
25.0 kHz
H
f
=
20.0 Hz
V
f
= 48.10 MHz
CLK
- 36 -
N11A27;36/37
Camera body
N ever excee d predeterm ined
depth of t hrea de d hole
M ounti ng brac ket etc
F ixing screw
.
Advertisement
Table of Contents
