Takenaka System FS2300DV Instruction Manual page 21

● Setting of cursor 1(White) display/hide, shape setting
It can set the shape of cursor 1. It can be changed by entering the argument [H'00 to H'03] to the communication
command "H'40" as follows.
H'00 : Hide cursor
H'01 : Lattice-shaped cursor
H'02 : Box-shaped cursor
H'03 : Cross-shaped cursor
● Setting of cursor 2 (Blue) display/hide, shape setting
It can set the shape of cursor 2. It can be changed by entering an argument to the communication command "H'40"
In the same manner as "Setting of cursor 1".
● Setting of cursor 3 (Green) display/hide, shape setting
It can set the shape of cursor 3. It can be changed by entering an argument of the communication command "H'40"
In the same manner as "Setting of cursor 1".
● Setting of cursor 4 (Red) display/hide, shape setting
It can set the shape of cursor 4. It can be changed by entering an argument of the communication command "H'40"
In the same manner as "Setting of cursor 1".
(6-4) Other settings
The contents of table 6-6 are not displayed in menu-driven form by OSD.
Communication
command
H'2A One push white balance
H'3B Monitor clipping area (Display area)
H'47 Cursor line width
H'46 Hide setting of the cursor (Camera Link output)
H'48 Cursor movement
H'4A Moving amount of Cursor
H'4E Centering of Cursor
H'4C Up-and-down movement of the Monitor clipping area
H'4D Moving amount of the Monitor clipping area
H'4E Centering of Monitor clipping area
● One push white balance
It can adjust the white balance by entering the argument [H'01] to the communication command "H'2A".
● Cursor line width
It can set the width (line thickness) of cursor 1 to 4. It can set 1 to 7 pixels in horizontal direction and 1 to 7 lines in vertical
direction by entering the argument [H'01 to H'07] to the communication command "H'47". One-pixel gray shadow is
added to the displayed cursor only in horizontal direction.
Table 6-6 Other settings
Set contents
Lattice-s haped
curs or
Default
H'00
H'4B
H'01
H'01
H'00
H'00
- 21 -
N11A27;21/37
Box-shaped
Cross-shaped
c ursor
cursor
Argument data
Setting range
H'00 : OFF
H'01 : ON
H'01 to H'96
H'01 to H'07
H'00 : OFF
H'01 : ON
H'01:start position- upward
H'02:start position- downward
H'03:start position-leftward
H'04: start position-rightward
H'05:width-upward
H'06: width-downward
H'07: width-leftward
H'08: width-rightward
H'00 : +1
H'01 : +10
H'00 : OFF
H'01 : ON
H'01 : Upward
H'02 : Downward
H'00 : +1
H'01 : +10
H'00 : OFF
H'01 : ON