Takenaka System FS2300DV Instruction Manual page 15

(5-5) Data save and data read setting
This camera incorporate nonvolatile memories and various operation mode settings and level settings can be
stored on them. And the data set at each address is overwritten with the contents of nonvolatile memories at the
time of power-on.
Execute the following commands to save data.
Enter an argument [H'01] to communication command "H'DC" (Enabled communication for EEPROM )
Enter an argument [H'01] to communication command "H'DA" (Save data set by each command)
(!) This camera does not have the "Program page setting" function.
Execute the following commands to read out saved data.
Enter an argument [H'01] to communication command "H'DC" (Enabled communication for EEPROM )
Enter an argument [H'01] to communication command "H'DB" (Read data saved by each command)
- 15 -
N11A27;15/37