Service Tables; Service Level Functions; How To Enter And Exit The Fax Service Mode; Bit Switch Programming (Function 01) - Ricoh Aficio 220 Service Manual

4. SERVICE TABLES

4.1 SERVICE LEVEL FUNCTIONS

4.1.1 HOW TO ENTER AND EXIT THE FAX SERVICE MODE

To Enter Fax Service Mode:
1. Ensure that the machine is in standby
mode.
2. Press !"# $ %, then hold down & for
more than 3 seconds.
The SP mode main menu appears.
3. Press ' to enter the fax service mode.
To Exit Fax Service Mode:
1. Press ! or "PrevMenu" until the SP mode
main menu appears.
2. Press the ! key.

4.1.2 BIT SWITCH PROGRAMMING (FUNCTION 01)

1. Enter the fax service mode.
2. Press ( ).
3. Press one of the following numbers, as
required:
) – System bit switches
' – Scanner bit switches
* – Printer bit switches
+ – Communication bit switches
, – G3 bit switches
- – G4 internal switches
. – G4 parameter switches
NOTE: 1. SG3 bit switches are located under function 17.
2. An optional G4 interface is required to access the G4 internal and G4
parameter bit switches.
SM
SERVICE LEVEL FUNCTIONS
4-1
A895M501.BMP
A895M502.BMP
A895M503.BMP
A265/A267