OWC MERCURY ELITE PRO DUAL MINI Assembly Manual & User Manual page 9

7. Turn the inner chassis over and set it on the outer
enclosure so that the drives rest on two of the feet
and slightly overhang the edge of the enclosure,
as shown at right.
8. Take the larger screws from the packet and insert
them in the row of screw holes at the back of the
chassis, then partially tighten them.
9. Take the rest of the large screws and insert them
in the remaining screw holes, partially tightening
them.
10. Turn the inner chassis over and visually inspect
the two drives to ensure they are properly aligned
before moving on to the next step.
OWC MERCURY ELITE PRO DUAL MINI
7
DEVICE SETUP