Rotor Direction; Pre-Flight Check - Compass Model Odin90 Assembly Manual

14

Rotor Direction /

When Main Blades turn clockwise
side . If not the belt is installed incorrectly
,

Pre-flight Check /

1 . Ensure that receiver
2 . Check all bolts and screws are tight
3 . Repeat step 11 to check all Servo functions are correct
4 . Ensure Tail + Gyro direction are correctly set
5 . Check that the Main Blades
,
6 . Always hold the Rotor Head when starting the engine
7 . Check that there are no missing or damaged parts
8 . Make sure all electronic devices are firmly fastened and connected
9 . Only turn off the transmitter after turning off the receiver
, tail blades should turn clockwise when view from the Tail Fin
,
& transmitter battery are fully charged
.
, Paddles and Tail Blades are installed in the right direction
.
.
.
, .
.
.
.
.
12
.
.
.
, never fly with any damaged parts
. .
.
, .
.
.
.
.
.
.
.