Compass Model Odin90 Assembly Manual page 15

G At the low throttle stick and the throttle trim )
the carburetor hole should be completely close. At
full throttle stick, carburetor hole should be
completely open. Adjust the ATV in radio, or/and the
control horn position on the engine to achieve above
requirement. Make sure the servo does not bind at
any traveling point.
，
，
7°
H)At Rudder Middle Stick, Set Rudder Servo 90 degree to the tail link And Set Tail Blade to 7 deg Pitch.
12
Servo Direction Check/
Turn on the radio
mode . Move the stick and check the reaction of the Swash Plate
radio settings accordingly
,
.
Mod 1
Aileron Check
Elevator Check
。
,
, position the heli tail point to yourself
.
.
Mod 2
,
。
。
9 0 ,
. Make sure radio is set to 120 degree CCPM
120 ccpm
Swash Plate Reaction
Tilt Left
Tilt Forward
7 .
, Throttle and Tail Pitch Plate
.
Tilt Right
Tilt Backward
. Adjust