Specifications - Makita UH200D Instruction Manual

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
2-1. Lock-off button
2-2. Switch trigger
3-1. Indication lamp
6-1. Trimming direction
6-2. Tilt the blades
6-3. Hedge surface to be trimmed
7-1. String
11-1. Clamping nuts
11-2. Chip receiver
11-3. Screws on the shear blades
11-4. Blade cover to be always installed
before installing the chip receiver
12-1. Brush
13-1. Machine oil
14-1. Blade cover
15-1. Undercover
15-2. Locking lever
15-3. Press
15-4. Turn
16-1. Undercover
17-1. Screws

SPECIFICATIONS

Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Do not expose to rain.
･
Danger; be aware of thrown objects.
･
Keep bystanders away.
･
Cutting means continues to run after the
motor is switched off.
Explanation of general view
18-1. Crank
18-2. Shear blades
19-1. Blade cover
20-1. Bent part of the base plate of shear
blades
21-1. Screws
22-1. Locking lever
22-2. Undercover
24-1. Groove in the undercover
24-2. Locking lever
25-1. Hook hole
26-1. Shear blades
26-2. Base frame
26-3. Blade cover
28-1. Blade cover
28-2. Shear blades
29-1. Recessed part of crank
29-2. Pins
29-3. Crank
29-4. Apply grease
30-1. Base plate
30-2. Hole in the base plate of shear
blades
Model
Blade length
-1
)
Overall length
Net weight
Rated voltage
END011-3
Cd
Ni-MH
Li-ion
Intended use
The tool is intended for trimming hedges.
5
30-3. Oval holes that are overlapped
32-1. Undercover
32-2. Locking lever
34-1. Groove in the undercover
34-2. Locking lever
35-1. Blade cover
36-1. Undercover
36-2. Locking lever
36-3. Press
36-4. Turn
37-1. Undercover
37-2. Shear blade
37-3. Crank
38-1. Groove
38-2. Base frame
39-1. Change lever
39-2. Protrusion on base frame
39-3. Base frame
40-1. Change lever
40-2. Protrusion on base frame
40-3. Base frame
UH200D
200 mm
1,250
460 mm
1.2 kg
D.C. 10.8 V
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE014-1