Manual Saving; Automatic Saving - TESTO 445 Instruction Manual

MAN
M M A A N N
AUTO
M.05 N.0017
MAN
MEMORY
1:
19665
1:
21. 8 5
ESC
Location
AUTO
A A U U T T O O
MORY
AUTO
C Y C L E - N .
0
66
AUTO
C Y C L E
m i n s e c
01: 3
M.05 N.0017
AUTO
1:
m3/h
19665
1: m/s
MAN

Manual saving:

Each time
the instrument and includes measured values, location, date and
time. The counter in the top left corner of the display shows the
number of logs saved for this location.
m3/h
Saving a log with timed or multi-point mean calculation :
The log includes MIN value, MAX value and mean of the
measurement and also single values in multi-point mean
m/s
calculations.
AUTO

Automatic saving:

When this saving function is set, the instrument automatically
accepts the measured values at fixed intervals and saves them
(=logger operation).
The number of measuring cycles (CYCLE-N.) to be saved and
intervals (CYCLE) have to be programmed:
O U T
1. Cycle-N.
The instrument automatically offers the maximum possible number
of measuring cycles. Set required number using
/
Confirm set value by pressing
2. Cycle
Select interval in which the measured values are to be saved. The
blinking position can be changed using
h
Confirm set value by pressing
00
Automatic saving is started by pressing
until the programmed measurement series is accepted.
0
M.06
N.0001
A A U U T T O O
is pressed a log of the measurement is saved in
/ .
E E S S C C
L L o o c c a a t t i i o o n n
An additional measurement series is
added.
19
5. Memory settings
Manual / Automatic saving
.
.
.
. The symbol flashes
Cancel saving procedure.
Starts automatic saving again.