Checking Steering Angle Sensor, Sensor For Transverse Acceleration And Sender For Rotation Rate - Volkswagen Golf 4 1998 Service Manual

On Board Diagnostic (OBD), performing
Read measured value block
1 2 3
Read measured value block
0.0 0.0m/s2- 1.26 /s
4
4
Checking steering angle sensor, sensor
for transverse acceleration and sender
1)
for rotation rate
Display group number 004
- Press keys 0, 0 and 4
- Confirm entry with key Q.
- There are always 3 display zones -
arrows- in the measured value block.
Decoding the individual values in display
zones 1 to 3 can be read-off from the
following tables.
Indicated on display: e.g. (vehicle
stationary)
Press C key for the next display group
number entry.
If the key is pressed, keys 0 and 8 for
work sequence "Read measured value
block" must be pressed again afterwards to
regain entry.
1)
For ABS/EDL/ASR/ESP and
ABS/EDL/ASR/ESP 4MOTION only
Стр. 93 из 129
01-251