Erase Dtc Memory (Function - Volkswagen Golf 4 1998 Service Manual

On Board Diagnostic (OBD), performing
Basic setting 60 OFF <4-ON>
Compens. not poss.
Rapid data transfer
Enter address word XX
Rapid data transfer
06 - End output
12.
HELP
Q
- or:
If this appears in the display, the measured
values for the zero compensation are not
within the allowed tolerance.
- Check specifications with help of function
08 "Read measured value block"
Page 01-240 , Display group number
004.
1. Check DTC memory (Function 02)

2. Erase DTC memory (Function 05)

3. End output (Function 06)
4. Switch off ignition.
5. Switch on ignition.
6. Perform zero compensation again.
- Press
key.
Indicated on display:
- Press keys 0 and 6, this ends the output.
Indicated on display
ABS and ESP warning lights light up for
approx. 2 seconds.
Стр. 116 из 129
01-274