When All 8 Cycles Have Been Performed, This Message Appears On The Display - Volkswagen Golf 4 1998 Service Manual

On Board Diagnostic (OBD), performing
Basic setting
Depr. pedal 10X; bleed screw CLOSED
System in basic setting
Part. bleeding ended...
Rapid data transfer
Select function XX
Rapid data transfer
06 - End output
Rapid data transfer
Enter address word XX
2
17
HELP
Q
Help
Indicated on display:
- Press key 3 on V.A.G 1551 or arrow up
key on VAS 5051
When all 8 cycles have been performed,
this message appears on the display:
- Press
key.
Indicated on display:
- Press keys -0- and -6-, this ends the
output.
Indicated on display
- Confirm entry with Q key
Indicated on display
- Press C key
- Switch off ignition.
- Disconnect connection to V.A.G 1551
scan tool.
- Bleed brake system again
Repair Manual, Brake System, Repair
Group 47; Bleeding brake system, vehicles
with and without ABS
For vehicles with ABS/EDL/ASR/ESP:
perform zero compensation for Sender
1 for brake booster -G201-
278 .
Стр. 110 из 129
01-268
Page 01-