Download Print this page

Advertisement

Quick Links

USER'S INFORMATION
MANUAL
AIR HANDLERS
MODELS: ALL
CONTACT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
HOW YOUR AIR HANDLER WORKS . . . . . . . . . . . . . . . . . . . . . . . . 1
SYSTEM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
SETTING THE THERMOSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fan Operation Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Heating Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cooling Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
MANUAL CHANGE-OVER THERMOSTAT . . . . . . . . . . . . . . . . . . . 2
ELECTRONIC THERMOSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
TO MAXIMIZE OPERATING EFFICIENCY . . . . . . . . . . . . . . . . . . . . . 2
HEATING CONSERVATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
COOLING CONSERVATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CONTACT INFORMATION
• Go to website at www.york.com, then click on "Contact Us" and
follow the instructions.
• Contact us by mail:
This high efficiency Air Handling system has been precision engi-
neered, manufactured of high quality materials, and passed many rigor-
ous tests and inspections to ensure years of satisfactory service. That's
why you can rely on efficient, trouble-free operation. Your system is fully
automatic. Set the thermostat and forget it. And it's automatically pro-
tected from damage by voltage fluctuations or excessive heating or
cooling demands. Your Air Handler is actually two units - the indoor air
blower and the indoor refrigeration coil, part of the outdoor AC or Heat
Pump system installed with this Air Handler. You may also have an
Electric Resistance Heater kit installed in this air handler.
FIRE OR ELECTRICAL HAZARD
Failure to follow the safety warnings exactly could result in serious
injury, death or property damage.
A fire or electrical hazard may result causing property damage, per-
sonal injury or loss of life.
SECTION I: HOW YOUR AIR HANDLER
WORKS
If your hand is wet and you blow on it, it feels cool because some of the
moisture is evaporating and becoming a vapor. This process requires
heat. The heat is being taken from your hand, so your hand feels cool.
That's what happens with a heat pump. During the cooling cycle, your
system will remove heat and humidity from your home and will transfer
this heat to the outdoor air. During the heating cycle, your system will
remove heat and humidity from the outdoor air and will transfer this heat
to your home. This is possible because even 0°F outdoor air contains a
great deal of heat.
Remember that your heat pump doesn't generate much heat, it merely
transfers it from one place to another.
Johnson Controls Unitary Products

TABLE OF CONTENTS

CARE OF SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
MOTOR LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PERIODIC INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
AIR FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Filter Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Removing Internally Mounted Air Filters . . . . . . . . . . . . . . . . . . . .3
For Externally Mounted Air Filters . . . . . . . . . . . . . . . . . . . . . . . . .3
How to Clean your Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
CONDENSATE DRAIN LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
COIL CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BLOWER CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SECTION II: SYSTEM OPERATION
Your thermostat puts full control of the comfort level in your home at
your fingertips. DO NOT switch your thermostat rapidly "On" and "Off"
or between "Heat" to "Cool" This could damage your equipment. Always
allow at least 5 minutes between changes.
SETTING THE THERMOSTAT
Although thermostats may vary widely in appearance, they are all
designed to perform the same basic function: to control the operation of
your air conditioning or heat pump system. Regardless of size or shape,
each thermostat will feature a temperature indicator; a dial, arm, or
push button for selection of the desired temperature; a fan switch to
choose the indoor fan operation; and a comfort switch for you to select
the system mode of operation.
Only approved thermostats have been tested and are fully compatible
with this equipment. Please be aware that many different thermostats
operate on batteries or "power stealing" principals. These types of ther-
mostats can not be supported as trouble free when used with this product.
A complete operating instruction is provided by the manufacturer for
each thermostat. Familiarize yourself with its proper operation to obtain
the maximum comfort with minimum energy consumption.
If your system has been designed to allow both cooling and heating
operation, you may have either a manual change-over type, or a pro-
grammable electronic type thermostat.
Manual change-over simply means that the comfort switch must be
manually positioned every time you wish to switch from the cooling to
heating or heating to cooling modes of operation.
The computerized electronic thermostat is actually a sophisticated elec-
tronic version of a manual change-over type. This thermostat includes
features which allow "set-back" temperature variations for periods of
sleep, or while you are away during the day, and means energy savings
for you. The thermostat also features a digital clock.
Consumer Relations
1060254-UUM-A-0713
ISO 9001
Certified Quality
Management System

Advertisement

loading

Summary of Contents for York ALL

  • Page 1: Table Of Contents

    Limited Warranty ........5 CONTACT INFORMATION Johnson Controls Unitary Products Consumer Relations • Go to website at www.york.com, then click on “Contact Us” and 5005 York Drive follow the instructions. Norman, OK 73069 •...
  • Page 2: Fan Operation Selection

    Don’t turn your system off even though you will be ature setting, typically between 75 and 80°. Comfort sensations vary away all day. On a hot day, your system may have to operate between 8 with individuals. The lower the indoor temperature desired, the greater to 12 hours to reduce the temperature in your home to a normal comfort will be the number of hours your unit must operate.
  • Page 3: Care Of System

    • Check the drain lines to make sure there are no cracks, leaks or Replace the panel and push levers in to secure the panel. blockages. • Check the area around the unit and all registers and grilles – to For Externally Mounted Air Filters maintain good air flow.
  • Page 4: Blower Care

    1060254-UUM-A-0713 BLOWER CARE Even with good filters properly in place, blower wheels and motors will become dust laden after long months of operation. The entire blower Make sure you DO NOT move the clip on weight on the indoor fan assembly should be inspected annually.
  • Page 5: Limited Warranty

    If a Dealer response is not received within a reasonable amount of time, notify Company at: Johnson Controls Unitary Products, Consumer Rela- tions, 5005 York Drive, Norman, OK 73069 or by telephone at (877) 874-7378. All warranty service or repair will be performed during regular busi- ness hours, Monday through Friday 9:00 AM - 5:00 PM.
  • Page 6: 5005 York Drive

    14. Electricity or fuel costs, or increases in fuel or electric costs, for any reason including additional or unusual use of supplemental electric heat. This warranty is in lieu of all other express warranties. All implied warranties, including the implied warranty of merchantability and fitness for a partic- ular purpose are limited in duration to the actual warranty period applicable to the part.