Daily Product Inspections - Leckey Mygo Max User Instructions

11 Cleaning & Care
How to Maintain
When cleaning we recommend that you use
only warm water and a non-abrasive
detergent. Never use organic solvents or dry
cleaning fluids.
Upholstery and fabrics
1. The cushion covers can be removed,
machine washed at 40ºC and tumble dried at
a low temperature.
All other soft upholstery can be placed into
the washing machine intact, after removing
bolts and fastenings.
2. The upholstery and fabrics can also be
cleaned by hand whilst in place. When
cleaning we recommend that you use only
warm water and a non-abrasive detergent.
3. Staining should be removed as quickly
as possible with absorbent cloth, towels or
a sponge. Routine soap and warm water
sponging is effective for ordinary soiling
and minor spills. Be careful not to over wet
the fabric as this will cause the stainingto
spread.
4. Antiseptic cleaning agents can be used
on more stubborn stains. These may require
a safe solvent such as Isopropyl Alcohol or
Mineral Spirit. A half cup of household bleach
to 5 litres of water can also be used as a
useful disinfectant.
5. The Leeway Pelvic Cradle and trunk
harnesses can be machine washed at 40
Deg C. Make sure all bolts and fasteners are
removed first as they may cause damage to
your washing machine. Store these in a safe
place and out of reach from children.
6. Always ensure the product is dry before
use.
Metal and plastic components
1. Soap and water or antibacterial spray can
be used for daily cleaning.
2. For deep cleaning a low pressure steam
cleaner can be used.
3. Do not use solvents to clean plastic or
metal components.
4. Make sure the product is dry before use.
12 Daily Product
Inspection
(Therapists, parents & carers)
We recommend that daily visual checks of
the equipment are carried out by therapists,
carers or parents to ensure the product is
safe for use. The recommended daily checks
are detailed below.
1. Check that there is no lateral movement or
wobble in any of the moving parts. Ensure
all adjustment knobs and bolts are in place
and secure.
2. Check all upholstery and Velcro for signs
of wear and tear.
3. Check all castors are moving freely and
lock securely.
4. Ensure the handle and locking pin on the
seat interface plate is fully engaged and
the seat unit is securely fixed onto the
chassis.
5. Ensure the Leeway Pelvic Cradle is fully
secured around the user and they cannot
slide or creep forward in the seat.
6. Ensure the footplate is attached securely.
If in any doubt to the continued safe
use of your Leckey product or if any
parts should fail, please cease using
the product and contact our customer
service department or your local dealer
as soon as possible.