Leckey Mygo Max User Instructions page 13

9.1 Leeway Pelvic Cradle
The Leeway Pelvic Cradle should be flat
and open when the user is placed into the
Mygo Max. All four side and starps should be
already attached to the seat. First fasten the
buckle (a) at the front of the Leeway Pelvic
Cradle. Then fasten the Velcro (b) at the
sides to fit the Leeway Pelvic Cradle to the
user. Then adjust the front and rear straps
(c) and (d) to secure to position the user's
pelvis.
B
A
9.2 Hip Lateral
The hip laterals can be width and angle
adjusted to suit the user's requirements.
Loosen the screws (a) at the back of the
sacral support. Move the hip laterals to
required position. Ideally the hip laterals
should always be rotated so they rest on
top of the seat cushion even if the backrest
or sacral support is angled. Once the hip
laterals are in position, retighten the screws
securely. The laterals can also be angled
to help support, abduction adduction or
windsweeping.
B
C
D
To adjust the angle of the hip laterals loosen
the screw (b) on the hinge of the hip lateral.
Adjust to the required angle and retighten
the screw. The pads can also be adjusted
in depth and a small degree of rotation by
loosening the screws (c) on the pad, sliding
it to the required position and retighten the
screws.
A
C