Leckey Mygo Max User Instructions page 17

9.13 Chest Harness
To change the width of the chest harness, lift
the front cover, adjust the Velcro straps to
the desired width and replace the cover.
9.14 Trunk Harness
The trunk harness will be open but remain
attached by the clip (a). When placing the
child in the seating system bring the trunk
harness across the front and attach by
connecting the clip into the buckles on the
other side (b). All of the connecting straps
are adjustable by releasing the camlock,
adjusting to the desired position and then
securing the camlock.
A
9.15 Shoulder Support
To adjust the angle of the shoulder support
laterals, loosen screw, move laterals to
required angle and retighten.
B
9.16 Head support
To adjust the height, depth and angle of the
contoured headrest, loosen the hand knobs
(A) and when set to the desired position
retighten the knobs. Do not remove the
headrest while the user is in the seat.
Never use the headrest to force the position
of the user's head. Always use caution to
ensure fingers do not become trapped when
adjusting the headrest
A