Advertisement
Available languages
Available languages
15. Doors
Attach
Doors to cart front with 4 GG screws for each Hinge as shown.
If the doors are not aligned
correctly
after assembly° they can be adjusted
as follow:
Screw#1
is used to adjust the gap between
doors and align the door to the cart side panel (see pic 1);
Screw#2
is used to adjust the gap between
doors and cart side panel (see pic 2)
Picl
16. Grids,
Diffusers,
Racks and Knobs
- Place diffusers
within the support tabs.
- Install main burner cooking
grids with square lifting
hole to front.
- Install warming
rack into four support holes as shown.
- Push main burner and side burner control
knobs onto valve stems.
Pic2
28
Advertisement
