Advertisement
Available languages
Available languages
5.CartBeam, Triangle Strengthening Wedge, T ank Exclusion Bar
- Screw 2 AAscrews i ntothetopfrontof eachsidepanel a sshown below. L eave screw heads protruding
approximately 1/8-inch above panel s urface.
- Slide the2
notches in each end of the cart beam into place over the protruding
screws..
- Tighten the screws to secure the cart beam to the side panels.
- Attach
1 Triangle
Strenthening
Wedge
to each front corner of the cart with 4 AA screws as shown.
- Attach
the Tank Exclusion Bar from the bottom
panel to the back panel
using 2 FF screws as shown in both
figures on this page.
6. Drip Tray
Attach
the drip tray to the tops of the side panels with 4 AA screws as shown.
\
23
Advertisement
