Maintenance - Renkforce AN-8006 Operating Instructions Manual

Maintenance

Regularly check the technical safety of the CD tuner, e.g. for damage of the cables or the housing.
If it can be assumed that safe operation is no longer possible, the device must be turned off and precautions are to
be taken to ensure that it is not used unintentionally. Disconnect the car power system!
It can be assumed that safe operation is no longer possible if:
• the device is visibly damaged,
• if the appliance does not function for some reason, or
• following considerable stress during transportation.
Before cleaning the CD tuner or performing maintenance, the following safety instruction must be observed:
Live components may be exposed if the covering is opened or components are removed.
Prior to start of maintenance or repair works, the device must be disconnected from all voltage
sources.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all voltage sources.
Only qualified experts familiar with the hazards involved and the relevant regulations may
perform repairs.
Apart from this, the device does not need servicing. The outside should only be cleaned with a soft, dry cloth or a
brush.
Never use caustic cleaning agents or chemical solutions as the surface of the housing may be damaged.
80
Operating instructions

English