Selecting The Playback Source; Calling Up The Display Information - Renkforce AN-8006 Operating Instructions Manual

Selecting the playback source

Press the / MODE button (6) in order to select the individual playback sources.
Selection is made in the following sequence:
Radio > CD > SD/MMC > USB > AUX > BT AUDIO

If no CD, USB memory or SD/MMC card is inserted, or if a bluetooth source is not connected, these
sources are skipped during selection.

Calling up the display information

You can call up different information via the display (5) with the button 9 / DISP (22) depending on the operating mode.
Each push of a button switches the called up information further. After 5 seconds, the display automatically returns
to the basic display (first display in the list below).
When an RDS station is being received
Radio operation: Station name > time > program type > received frequency
CD/USB/SD operation:
When no RDS station is being received
Radio operation:
CD/USB/SD operation:

If the transmitter does not transfer any time information or PTY information, the display shows
NO CLOCK or PTY NONE.
66
CD/USB/SD information > time > program type > received frequency > station name
Received frequency > time > PTY NONE > PS NONE
CD/USB/SD information > time > PTY NONE > received frequency > PS NONE
Operating instructions

English