Remote Control - Renkforce AN-8006 Operating Instructions Manual

Remote control

The remote control can be attached directly at the steering wheel with the enclosed support. The IR receiver eye (3)
is located in the front slot of the CD tuner.
Steering wheel installation:
• Straighten out the steering wheel.
• Open the two screws (E) of the steering wheel attachment.
• Position the inner part (A) of the steering wheel attachment on the inside of the steering wheel (C).
• Pull the rubber band (B) around the steering wheel and hook it into the catch under tension (ill. 1).
• Cut off any excess rubber band (ill. 2).
• Attach the external part (D) of the steering wheel attachment with the two screws again (E) (ill. 3).
• Slide the remote control onto the steering wheel attachment (ill. 4 and ill. 5).
• To remove the remote control, release the safety lever (F) and pull the remote control out of its attachment
(ill. 6).
55