Orion opm-4260 User Manual page 5

Stand Unit (Option)
y
Please do not install our product at following locations to protect the product and
prevent possible malfunction.
- Places of vibration or shock: PDP set may fall and damaged
- Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated.
- Around high voltage power lines: Noise from the power line may affect screen images
- Around heating apparatus: PDP set may be overheated and damaged.
y
The set can be installed as shown below.
(For further information, refer to the optional 'Stand Installation and Setup Guide'.)
Stand
Stand
PDP
Hanger Bolt
Install on a Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.
7
Wall Mounting Unit (Option)
y
The set can be installed on the wall as shown below.
(For further information, refer to the optional 'Wall Mounting Bracket Installation and Setup Guide'.)
Guide Pin
Mount on the wall
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.
Infinitely expandable
y
Please check the stability of wall.
If the wall is not strong enough, reinforce the wall before installation.
y
Please connect all the cables to proper ports in a set before installation.
Hanger
Hanger
PDP
Hanger Bolt
8
Guide Pin