Auto Tracking; Setting "Timer On/Off - Orion opm-4260 User Manual

5.12. Auto Tracking

y Alignment adjustment is available when input source is PC.
y Go to "Control" in menu bar → Tracking → Auto in order to run "Tracking Auto" window.
y
In case alignment doesn't work through "Tracking Auto" command,
users can tune finely through "Tracking Manual". Go to "Control" of
menu bar → Tracking → Manual or press "Ctrl+M" using keyboard.
y "Tracking Manual" window enables users to set Frequency, Phase,
LineStart and PixelStart.
y When "Tracking Manual" window is on display, users cannot display
"Picture Control" window.
y Even when "Tracking Manual" window is on display, selecting 'ID' is
available by clicking right button of mouse.
(Refer to "5.5 PDP ID Setting".)
Tracking Manual Window
y Detail adjustment steps are as follows.
1) Tune "Phase" until the vertical lines are clearly adjusted..
2) Tune "LineStart" to adjust vertical alignment. "PixelStart" for horizontal alignment.
3) Adjust "Frequency" if alignment is still wrong.
If you adjust "Frequency", repeat step 1) and 2) to fit alignment.
Adjustable range is as follows
-The range of "Frequency" you can adjust is -50 to 50
-The range of "Phase" you can adjust is 0 to 31
-The range of "Linestart" you can adjust is -23 to 10
-The range of "Pixelstart" you can adjust is -50 to 40
y Check "All PDP" button to transmit tracking command data to all connected MPDPs regardless of ID.
y
Click "Exit" button or press "Ctrl+X" using keyboard to close "Tracking Manual" window.
33 33

5.13. Setting "Timer On/Off"

y MPDP turns on and off through designated time schedule set by users.
y In order to activate timer window, go to Control menu bar → Timer or enter "Ctrl+T" using keyboard.
Timer
y
Follow as described below to control "On Time" or "Off Time".
1) Set hour and minute in "On Time".
2) Check "Once" for only one time running and check "Daily" for daily running of "On Time" function.
y Follow "On Time" to control "Off Time" function.
y
"Timer On/Off" function lasts even though the "Timer" window is closed.
y Users can not set same time in "On Time" and "Off Time".
y Timer function does not work when MSCS is Off or disconnected.
34 34
Infinitely expandable