User Interface - Printing Innovation iCUBE 1 User Manual

4.1. User Interface

It provides access to the printer-user-control-screen. From this screen you can Clear
Errors, Cancel a Job, Reset the Job Counter and Reset the Page Counter. You can also perform
some maintenance and operating tasks such as:
Clear Error: If the engine is in error status, it is possible to delete with this button. There are
some fatal states that are unable to delete.
Cancel job: delete the actual jobs. For example, if the machine is in error state and won't delete
the jobs, after cancel job it will print out the missed jobs again.
Reset job counter: this will reset the job counter
Reset Page Counter: this will reset the page cuonter
Wipe Printhead: this is a cleaning service issue. It will carry out a light cleaning on the
printhead.
Circulate Ink: Purges air from the pipes and primes the system after replacing the Ink Tanks or
Printhead Cartridge.
Release Printhead: Performs the same task as the Cover Release Button on the Printer. Pumps
the ink back into the Ink Tanks and opens the Printhead Cover to remove/install the Printhead.
System Deprime: Pumps the ink back into the Ink Tanks prior to replacing the Printhead or
transporting the Printer.
Eject Maintanence Module: this will eject the service station. If you would like to remove it
then use this at first. If not possible to use this button still can remove it manually.
Install Maintane Module: this will call home the service station.
Wiper Inspection: sets the service station in wiper state, so the wiper roller faces upward and
can be inspected.
Shutdown: Turns the Printer off from your computer.
Pinch Media: this will feed the media.
Retract media: this will unfeed the media
Request Pause: send pause command
Clear Pause: clear pause state
-48-