Media Tab - Printing Innovation iCUBE 1 User Manual

3.7.1.2. Media Tab

check with the nvm_getset command. For more information about please see under the engine
documentation.
My Print Settings: Access your custom print settings for various jobs that you uploaded through
the "Media Profile Upload" in the Toolbox.
Field
Position Adjusment
(offset units)
Media Layout
Page Cutting
My Print Settings
Values
•
Horizontal Offset
•
Vertical Offset
•
Inches
•
Millimeters
•
Pixels
•
Inter-Label Gap
•
Black Mark
•
Cut Sheet
•
Continuous
•
Use Printer Setting
•
Job Cut (cut at end of job
•
Sheet per cut (number of pages before
cutting)
•
Use Printer Settings
•
Defaults
-42-
Printing Adjustments: Allows
you to make minor
positioning changes to the
print area in relation to the
media if needed.
NOTE: Only works on jobs
using less than the full print
area (less than 8.5" wide).
Media Layout:
It's possible to set what kind of
print jobs will arrive.
Inter-Label Gap: the media has
labels form
Blackmark: the media has
blacmark ont he DOWNSIDE
CUTSheet: cut after the
medium size
Continous: in this mode the
machine will print fluently
Use printer setting: the engine
has some setting what can