Connecting The Icube - Printing Innovation iCUBE 1 User Manual

Connecting the iCUBE

3.4.
Make sure the printer is used with the mains cable suited to the requirements of the
electrical system of your country. The internal power supply in the printer is rated 115 to
240VAC, 50/60 Hz.

Insert the cable into the printer first. The cable connector should sit in the socket
securely.

Insert the cable into the mains socket.
Do not use an outlet that shares the same circuit with large electrical machines or
Turning Power On/Off
Powering Up:
Turn on the mains-switch
CAUTION
appliances
-20-