Electronics; Rgb Input - Siemens SMD 18101 CS Instruction Manual

Technical data

11.3 Electronics

11.3 Electronics
Multi-standard technology
Timing recognition
11.4

RGB input

Analog
Synchronization
•
•
RGB signals
Video signal
Sync pulses on R and B picture and blanking
signals
DC voltage superimposed on picture and picture
blanking signals
Synchronism signals
•
•
•
Signal combinations
•
•
•
Signal inputs via BNC
•
•
11-2
Horizontal
Vertical
S.1:
S.2:
S.3:
K.1:
K.2:
K.3:
Socket 1:
Socket 2:
Video modes with resolutions less than 1280 x
1024 are expanded to the TFT resolution, and
thus utilize the full display area (like multi-sync
CRTs)
H frequency, V frequency, interlaced, H scan rate
30 kHz ... 97 kHz
50 Hz ... 120 Hz
Analog, nominal 0.7 V
max.
Maximum permitted is 1 V between black value
and maximum saturation.
Analog, nominal 0 ... 1.0 V
Permitted
Must not fall below or exceed -1 V ... +2 V at the
RGB picture and blanking inputs.
H/V-SYNC separate, in the combinations:
H + V, with TTL-level into 2 kΩ
H - V, with TTL-level into 2 kΩ
C-SYNC separate, in the combinations:
+C-SYNC, with TTL-level into 2 kΩ
-C-SYNC, TTL-level into 2 kΩ
C-SYNC on green, min. amplitude 0.2 V
RGB and picture blanking signals analog,
H/V-SYNC separate
RGB and picture blanking signals analog,
C-SYNC separate
1)
RGB and picture blanking signals analog,
C-SYNC on green (SoG)
Assignment of the 5x BNC sockets
RED
GREEN/SoG
SMD 18101 CS / SMD 18101 CP / SMD 18101 D
Instruction Manual, 11/2005, A5E00472377A-002
into 75 Ω.
into 75 Ω.
max.
1)
:
2)