Table of Contents
Advertisement
Chapter 2
.
2.5" HDD installation
Note: Please note the orientation of the HDD tray placement
when you take out the try. It is recommended that the HDD is
installed in this orientation on the system.
Note: Note that the original package includes only one
SATA cable, You need to order another cable for additional
SATA HDD installation..
Network Application Platforms
3.5" HDD installation (optional)
Note: Please note that the 3.5" HDD is installed in the oppo-
site side of the 2.5" HDD's.
Follow these steps to install a hard disk to the FW-7571:
1.
Place hard disk on the hard disk tray and align the holes
of the hard disk with the mounting holes on the tray.
2.
Secure the hard disk with 4 mounting screws on the
hard disk tray.
3.
Connect the Serial-ATA power and data disk cables
to the hard disk's power and drive connector
respectively.
4.
Plug the Serial-ATA cable to the Serial-ATA Connector
on the main board.
5.
Put the hard disk tray with the installed hard disk back
to the system and secure it with the mounting screws.
Note: Note that the 3.5" HDD kit is an optional kit, please
order it separately.
Hardware Setup
6
Advertisement
Table of Contents
