Removing & Installing Body Components; Seat - Honda VFR 800 Owner's Manual

Removing & Installing Body Components

Seat

Prongs
Hooks
Fuel tank Frame stays
stays
54
32MGY600.indb 54
Removal
❙
1. Insert the ignition key into the seat lock,
Seat
and turn and hold the key clockwise to
unlock the seat.
2. Pull the rear of the seat back and up.
Installation
❙
1. Install the seat while aligning its hooks
with the fuel tank stays and its prongs
Ignition
with the frame stays.
key
2. Push forward and down on the rear of
the seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
Seat lock
The seat locks automatically when closed.
Take care not to lock your key in the
underseat compartment.
2011/01/11 16:28:00