Inspection & Maintenance - Drive Medical ZOOME 3 Owner's Manual

X. INSPECTION & MAINTENANCE
GENERAL GUIDELINES
Your scooter is an advanced mobility device, and with the correct routine
maintenance you can ensure years of maximum use. While some of the maintenance
can be done by yourself, you may need assistance from an authorized distributor.
Preventative maintenance is key to keeping your scooter in prime operating condition.
Follow the Maintenance Schedule at the end of this section to periodically inspect
your scooter for serviceable items.

Avoid abuse to the throttle and control functions.

Avoid prolonged exposure to extreme heat or cold.

Keep the scooter clean and free from moisture.

Never use a conditioner on the tread of the wheels.
EXPOSURE TO MOISTURE
Should your scooter come in contact with water or moisture, dry your scooter
thoroughly with a towel. Allow your scooter to sit in a dry place for 8 to 12 hours to
allow unseen moisture to evaporate. Check the throttle operation and brakes before
using your scooter again. If any items require service please contact your authorized
Drive Medical provider.
OPERATING TEMPERATURES
Your scooter is designed to operate ideally between 18°F and 122°F. In extremely cold
conditions your batteries may freeze depending on the battery charge, usage, and
composition of the batteries. In extremely hot conditions your scooter may operate at
a lower speed. This is due to the safety mechanism built into the unit to prevent
damage to the gearbox and other electronic functions when operating too hot.
ZooMe 3 Owner's Manual www.drivemedical.com
REV1.3.10.16
22